22 Stagebar 2 user manual
HSIC Mode, pixels = All
Pixels controlled in groups
When a fixture’s pixels are set to individual or grouped control (DMX MODE → Pixel grouping → 1, 2
or 3 in the control panel), the fixture uses one block of DMX channels per group.
For example, a Stagebar 2 RGBAW model with pixels that is:
• set to three groups of 2 pixels (DMX MODE
→ Pixel grouping → 2), and
• set to RGB mode (DMX MODE
→ Control mode → RGB)
will use nine DMX channels as follows:
RGB Mode, pixels = 2
Table 2 on page 13 shows the number of channels required in all the DMX modes available in the Stagebar
2.
Channel Value Percent Function
1
0 - 255 0 - 100
Hue
Red → Orange → Amber→ Yellow →
Green → Cyan → Blue → Indigo →
Violet
→ Magenta → Red
2
0 - 255 0 - 100
Saturation
Zero (white) → Full saturation
3
0 - 255 0 - 100%
Intensity
Intensity 0 →100%
4
0 - 255 0 - 100
Color Temperature Control
2000 - 10 000 K
Channel Value Percent Function
1
0 - 255 0 - 100%
Pixel group 1 Red
Intensity 0
→100%
2
0 - 255 0 - 100%
Pixel group 1 Green
Intensity 0
→100%
3
0 - 255 0 - 100%
Pixel group 1 Blue
Intensity 0 →100%
4
0 - 255 0 - 100%
Pixel group 2 Red
Intensity 0 →100%
5
0 - 255 0 - 100%
Pixel group 2 Green
Intensity 0
→100%
6
0 - 255 0 - 100%
Pixel group 2 Blue
Intensity 0 →100%
7
0 - 255 0 - 100%
Pixel group 3 Red
Intensity 0 →100%
8
0 - 255 0 - 100%
Pixel group 3 Green
Intensity 0
→100%
9
0 - 255 0 - 100%
Pixel group 3 Blue
Intensity 0 →100%
Comments to this Manuals