Martin RDM 5.5 Splitter User Manual download pdf (Page 22)

22 Martin DMX 5.3 and RDM 5.5 Splitters user manual

• A PC running a Windows version supported by the Martin Uploader

application.

• A Martin USB Duo™ DMX Interface Box (P/N 90703010) with its

supplied cables.

Firmware upload procedure

To install firmware in a Splitter:

1. Start the Martin Uploader application on a PC connected to the

Internet and download the splitter firmware from within the Uploader

application.

2. Connect the PC to a Martin USB Duo™ DMX interface box and

connect the interface box to the Splitter’s data in connector.

3. Upload the firmware as described in the Uploader’s help file or user

documentation.

4. Disconnect the PC and interface box and reconnect the Splitter to the

DMX link.

5. Cycle the Splitter’s power off and on and check that the Splitter

operates correctly. If a firmware upload seems to have been

unsuccessful, cycle power off and on again and check for correct

operation. If there still seems to be a problem, repeat the firmware

upload procedure.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

No comments

Martin RDM 5.5 Splitter User Manual Page 22