Martin ATOMIC 3000 User Manual Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
Manual do Usuário do Atomic 3000 Preparação para utilização 7
• Seguindoasinstruçõesdofabricanteda capadocabo,conecteo fioamareloe
verdenaterra,ofiomarromcomoativoeofioazulcomoneutro.Atabelaabaixo
mostraalgunsdiagramasdeidentificaçãodepinos.
INSTALAÇÃO
O Atomic 3000 pode ser instalado em qualquer orientação. O suporte de montagem
fornece cinco orifícios de 12 mm para fixação direta ou fixação de braçadeiras de
amarração.
Para instalar o suporte de montagem
1 Coloqueoaparelhoemumamesa,comadianteiravoltadaparabaixo.
2 Coloqueumaarrueladeplásticoemcadaprisioneirodosuportedemontagem.
3.Coloqueumaextremidadedosuporteemumdosprisioneirosdemontagem.Dobre
aoutraextremidadedosuportedemontagem,ligeiramenteaberta,emanuseie-a
atéoprisioneirooposto.
4.Coloqueumbotãomanualemcadaprisioneiro.Aperteosdoisbotõesmanuaispara
travarosuportedemontagemnolugar.
Fio Pino Marcação Cor do parafuso
marrom ativo "L" amarelo ou latão
azul neutro "N" prata
amarelo/verde aterramento
Atomic 3000 user manual Preparation for use 7
Following the cord cap manufacturer’s instructions, connect the yellow and green
wire to ground (earth), the brown wire to live, and the blue wire to neutral. The table
below shows some pin identification schemes.
I NSTALLATION
The Atomic 3000 may be installed in any orientation. The mounting bracket
provides five 12 mm holes for direct fastening or attachment of rigging clamps.
To install the mounting bracket
1. Place the fixture face down on a table.
2. Place a plastic washer on each mounting bracket stud.
3. Place one end of the bracket on one of the mounting studs. Bend the other end of
the mounting bracket open slightly and work it onto the opposite stud.
4. Place a hand knob on each stud. Tighten both hand knobs to lock the mounting
bracket in place.
Wire Pin Marking Screw color
brown live “L” yellow or brass
blue neutral “N” silver
yellow/green ground green
Table 1: Cord cap wiring
A
B
Verde
Tabela 1: Fiação da capa do cabo
Atomic 3000 user manual Preparation for use 7
Following the cord cap manufacturer’s instructions, connect the yellow and green
wire to ground (earth), the brown wire to live, and the blue wire to neutral. The table
below shows some pin identification schemes.
I NSTALLATION
The Atomic 3000 may be installed in any orientation. The mounting bracket
provides five 12 mm holes for direct fastening or attachment of rigging clamps.
To install the mounting bracket
1. Place the fixture face down on a table.
2. Place a plastic washer on each mounting bracket stud.
3. Place one end of the bracket on one of the mounting studs. Bend the other end of
the mounting bracket open slightly and work it onto the opposite stud.
4. Place a hand knob on each stud. Tighten both hand knobs to lock the mounting
bracket in place.
Wire Pin Marking Screw color
brown live “L” yellow or brass
blue neutral “N” silver
yellow/green ground green
Table 1: Cord cap wiring
A
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Comments to this Manuals

No comments