Martin MAC 2000 Wash User Manual download pdf (Page 1)

MAC 2000 Wash Beam XB Kit Installation Note 1

MAC 2000 Wash XB™ Beam Kit

Installation Guide

Introduction

This Installation Guide explains how to install the MAC 2000 Wash XB™ Beam Kit, P/N 91610103, to

convert a Martin Professional™ MAC 2000 Wash XB™ to a MAC 2000 Wash Beam XB™ model.

Installation only takes a few minutes. The Beam Kit can also be installed in a standard MAC 2000

Wash™ following this guide.

If you keep the standard components you remove, the MAC 2000 Wash Beam XB components can be

uninstalled and the fixture returned to standard MAC 2000 Wash XB configuration at any time.

For the latest documentation and information about this and all Martin Professional products, please

visit the Martin website at www.martin.com.

Warning! The MAC 2000 Wash Beam XB has a much more intense light beam than the standard

MAC 2000 Wash XB. Do not use the Beam fixture to illuminate any surface closer than 5 meters

(16 ft. 5 inches), or you may create a fire risk.

Warning! Apart from the new minimum distance to illuminated surfaces specified above, follow

all the other safety precautions in the MAC 2000 Wash XB user manual when installing the MAC

2000 Wash Beam XB Kit and using the modified product. The user manual is supplied with MAC

2000 Wash XB fixtures, and the latest revision of the user manual is also available for download

from the Product Support page for the MAC 2000 Wash XB at www.martin.com

Warning! Disconnect the fixture from power and allow to cool for at least 20 minutes before

starting work.

Warning! The MAC 2000 Wash Beam XB Kit must be installed by qualified professional

technicians only. Read all of this Installation Guide carefully before starting to install the Kit.

If you have any questions about how to install the MAC 2000 Wash Beam XB Kit or use the MAC

2000 Wash Beam XB safely, please contact your local Martin distributor (see

www.martin.com/distributors for details) or call the Martin 24-hour service hotline on +45 8740

0000, or in the USA on 1-888-tech-180.

Important! Make sure that the front lens does not face the sun directly for longer than a few

seconds at any time during daylight hours. The Beam lens can focus the sun's rays inside the

fixture, causing internal damage and creating a possible fire risk

Important! Do not get oil or grease onto optical components. If necessary, clean components

with 99.9% isopropyl alcohol.

Professional A/S and all affiliated companies disclaim liability for any injury, damage, direct or indirect loss, consequential or economic

loss or any other loss occasioned by the use of, inability to use or reliance on the information contained in this installation note. The

Martin logo, the Martin name and all other trademarks in this document pertaining to services or products by Martin Professional A/S or

its affiliates and subsidiaries are trademarks owned or licensed by Martin Professional A/S or its affiliates or subsidiaries.

P/N 35000615 Rev. B

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - Installation Guide

MAC 2000 Wash Beam XB Kit Installation Note 1MAC 2000 Wash XB™ Beam Kit Installation GuideIntroductionThis Installation Guide explains how to install

Page 2 - Installation procedure

MAC 2000 Wash Beam XB Kit Installation Note 2OverviewThe MAC 2000 Wash Beam XB Upgrade Kit contains the following items:• MAC 2000 XB Beam front lens

Page 3 - Figure 4

MAC 2000 Wash Beam XB Kit Installation Note 35. See Figure 3. MAC 2000 Wash XB and standard MAC 2000 Wash fixtures are supplied with 30, 40, 45 and 5

Page 4 - Figure 7

MAC 2000 Wash Beam XB Kit Installation Note 49. See Figure 5. Install the gobos by gently levering up the retaining clips in the color wheel and slid

Page 5 - MAC 2000 Wash XB Beam

MAC 2000 Wash Beam XB Kit Installation Note 5Appendix A:MAC 2000 Wash XB Beam recommended gobo positions1. Beam small aperture Ø18 (P/N 43006015)2. B

Page 6

MAC 2000 Wash Beam XB Kit Installation Note 6Notes

Page 7 - Control menu

MAC 2000 Wash Beam XB Kit Installation Note 7Appendix B: Changes in controlControl menuWhen the MAC 2000 Wash Beam XB gobos are installed, the contro

Page 8

MAC 2000 Wash Beam XB Kit Installation Note 8Martin Professional A/S • Olof Palmes Allé 18 • 8200 Aarhus N • DenmarkTel: +45 8740 0000 • Fax +45 8740

Martin MAC 2000 Wash User Manual Page 1

Browse online or download User Manual for Floodlights Martin MAC 2000 Wash. MAC 2000 Wash XB™ Beam Kit Installation Guide

Summary of Contents

More documents for Floodlights Martin MAC 2000 Wash

Comments to this Manuals

Martin MAC 2000 Wash User Manual Page 1

Browse online or download User Manual for Floodlights Martin MAC 2000 Wash. MAC 2000 Wash XB™ Beam Kit Installation Guide

Summary of Contents

More documents for Floodlights Martin MAC 2000 Wash

Comments to this Manuals

Related products and manuals for Floodlights Martin MAC 2000 Wash