Martin MAC 2000 Wash User Manual download pdf (Page 2)

MAC 2000 Wash Beam XB Kit Installation Note 2

Overview

The MAC 2000 Wash Beam XB Upgrade Kit contains the following items:

• MAC 2000 XB Beam front lens assembly, P/N 55204010

• ‘Small Aperture Ø18’ beam effect gobo, P/N 43006015

• ‘Cone’ beam effect gobo, P/N 43006012

• ‘Medium Aperture Ø28’ beam effect gobo, P/N 43006014

• ‘Three Dots’ beam effect gobo, P/N 43006013

• Warning label (min. distance to illuminated surfaces), P/N 33150093

Keep the protective packaging from the front lens assembly for possible re-use.

Installation procedure

To install the MAC 2000 Wash Beam XB components in a standard

MAC 2000 Wash XB fixture:

1. Disconnect the fixture from power and allow it to cool for at least

45 minutes.

2. See Figure 1. Release the head cover retaining screws

(arrowed), unclip the head cover safety cables and remove both

head covers.

3. Apply the tilt lock with the head topside up (in this position the

text on the back of the head is the right way up).

4. See Figure 2. Remove the

four flathead quarter-turn

screws from the front lens

assembly, release the front

lens safety attachment and

remove the front lens

assembly. Store it for

possible re-use if the fixture

is to be returned to standard

MAC 2000 Wash XB

configuration at a later time.

TOP

Figure 1

Figure 2

1 2 3 4 5 6 7 8

No comments

Martin MAC 2000 Wash User Manual Page 2