Martin RoboColor III User's Guide download pdf (Page 40)

Robocolor

Please note that one Robocolor Controller, i.e. four Robocolor Heads, can be controlled per

2308 channel.

Light On/Off

[shut]

Press [shut] once to power on the lamps in all the heads connected

to the Robocolor Controller. The status of the display now changes

to {On--}, indicating that the lamps are on.

[shut]

Press [shut] again to switch the lamps back off. The status of the

display now changes to {OFF-}, indicating that the lamps are off.

Colors

[color]

Press [color] once to access the color setting mode. The status of

the display now changes to {YCoX}, where X is a number between 1

and 6, indicating the selected color, and Y is either 1, 2, 3, 4 or A,

indicating which head your are controlling (A = all).

[↑]/[↓]

Press [↑]or[↓] to select which head(s) you want to control.

[up]/

[down]

Move the joystick up or down to change the color. You will see that

the status of the display changes accordingly.

[left]/

[right]

Move the joystick left or right to split the beam into two neighbouring

colors. The display shows the nearest color.

[color]

Press [color] again to quit the color setting mode.

Color Speed

[speed]

Press [speed] to access the color speed mode. The status now

changes to {YSPX}, where X is a number between 1 and 8

indicating the speed, and Y is either 1, 2, 3, 4 or A, to indicate

which head your are controlling (A = all).

[↑]/[↓]

Press [↑]or[↓] to select which head(s) you want to control.

[up]/

[down]

Move the joystick up or down to change the movement speed. You

will see that the status of the display changes accordingly.

[speed]

Press speed again to quit the speed setting.

Strobing

[shut] +

[up]/

[down]

The color wheel has a black-out position which can be used to

create strobe effects. Press the [shut] key and keep it pressed whilst

moving the joystick up and down to change the strobe rate. As you

move the joystick up and down you will see that the display changes

between {Shu0} and {Shu6}, indicating the strobe rate. {Shu0}

indicates that the strobe is disabled. {Shu6} is the slowest strobe

rate.

Martin 2308 Controller Version 2.1/3.1 Page 41

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 60 61

Comments to this Manuals

No comments

Martin RoboColor III User's Guide Page 40

Comments to this Manuals

Related products and manuals for Floodlights Martin RoboColor III