Martin RoboColor III User's Guide download pdf (Page 42)

Robocolor II

Please note that one Robocolor II Controller, i.e 4 Robocolor II Heads, can be controlled per

2308 channel (4 Robocolor II Heads).

Light On/Off

[shut]

Press [shut] once to power on the lamps in all the heads connected

to the Robocolor II Controller. The status of the display now

changes to {On--}, indicating that the lamps are on.

[shut]

Press [shut] again to switch the lamps back off. The status of the

display now changes to {OFF-}, indicating that the lamps are off.

Colors

[color]

Press [color] once to access the color setting mode. The status of

the display now changes to {YC X}, where X is a number between 1

and 13, indicating the selected color, and Y is either 1, 2, 3, 4 or A,

to indicate which head your are controlling (A = all).

[↑]/[↓]

Press [↑]or[↓] to select which head(s) you want to control.

[up]/

[down]

Move the joystick up or down to change the color. You will see that

the status of the display changes accordingly.

[left]/

[right]

Move the joystick left or right to split the beam into two neighbouring

colors. The display shows the nearest color.

[color]

Press [color] again to quit the color setting mode.

Color Speed

[speed]

Press [speed] to access the color speed mode. The status now

changes to {YSPX}, where X is a number between 1 and 8

indicating the speed, and Y is either 1, 2, 3, 4 or A, to indicate

which head your are controlling (A = all).

[↑]/[↓]

Press [↑]or[↓] to select which head(s) you want to control.

[up]/

[down]

Move the joystick up or down to change the movement speed. You

will see that the status of the display changes accordingly.

[speed]

Press speed again to quit the speed setting.

Martin 2308 Controller Version 2.1/3.1 Page 43

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 60 61

Comments to this Manuals

No comments

Martin RoboColor III User's Guide Page 42

Comments to this Manuals

Related products and manuals for Floodlights Martin RoboColor III