Martin DMX 5.3 Splitter User Manual download pdf (Page 7)

Introduction 7

Introduction

Thank you for selecting the MAC Aura™, an intelligent lighting fixture from Martin Professional™. This

compact LED-based moving-head washlight features:

• Independent or linked Beam (primary LED array) and Aura (secondary background LED array) control

• Range of pre-programmed independent and synchronized Beam and Aura effects available via DMX that

give instant access to the full potential of the fixture

• Beam RGBW color control with color temperature control

• Aura RGB control

• ‘Color wheel’ color snap Beam and Aura effects

• Onboard control panel and backlit LCD graphic display

• Motorized zoom

• Smooth electronic dimming

• Electronic shutter with strobe and pulse effects

• Calibrated and raw modes

• Osram Ostar high-power emitters

• DMX control and RDM fixture management

• 540° pan and 232° tilt ranges

For the latest firmware updates, documentation, and other information about this and all Martin Professional

products, please visit the Martin website at http://www.martin.com

Comments or suggestions regarding this document may be e-mailed to service@martin.dk or posted to:

Technical Documentation, Martin Professional A/S, Olof Palmes Allé 18, DK-8200 Aarhus N, Denmark.

Using for the first time

Important! The MAC Aura must be protected from environmental factors such as physical shocks

and vibration during transportation and storage to a level of protection equal to that provided by

Martin brand flightcases.

Warning! Read “Safety Information” on page 3 before installing, powering, operating or servicing

the MAC Aura. Before applying power to the fixture:

• Check the Martin Professional website at www.martin.com for the most recent user documentation and

technical information about the MAC Aura. Martin user manual revisions are identified by the revision

letter at the bottom of page 2.

• Carefully review “Safety Information” starting on page 3.

• Check that the local AC mains power source is within the fixture’s power voltage and frequency ranges.

• See “Power cables and power plug” on page 8. Install a Neutrik PowerCon NAC3FCA power input

connector on a suitable power cable. If drawing power from a mains power outlet, install a suitable power

plug on the power cable.

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

No comments

Martin DMX 5.3 Splitter User Manual Page 7