Martin smartMAC User Manual download pdf (Page 33)

Service and maintenance 33

4. See Figure 18. Insert a screwdriver

through the hole (arrowed) in the front

cover mounting plate and use the manual

adjustment screw to run the focus car back

into the module.

5. See Figure 19. Remove the two Torx 20

screws (arrowed) from the sides of the

effects module and lift the module out of

the fixture.

6. See Figure 20. Note the position of the

filterholder spring – with spring legs

pushing in towards the lamp – on the lamp

module front plate. Remove the four spring

retaining screws and remove the spring.

7. Put on clean cotton gloves to avoid getting

oil from your fingers on the filter. See

Figure 20. Place the diffuser segments

into the metal filterholder ring on the front

of the lamp module with their shiny sides

facing towards the lamp and matt, textured

sides facing towards the front lens.

8. Press the filter segments together so that

they form a complete disc with no gap

between the segments, then reinstall the

filterholder spring so that the spring legs

press onto the filter.

9. Reinstall all other components before reapplying power.

Figure 18: Focus car manual adjustment

screw

Figure 19: Removing the effects module

Figure 20: Filterholder and diffuser filter

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 55 56

No comments

Martin smartMAC User Manual Page 33