Martin MAC 401 Dual User Manual download pdf (Page 31)

Onboard control menus 31

INFO

VERS

MAIN

CPU firmware version in main processor

HEAD

CPU firmware version in head processor front module / rear module (if

installed)

pOHR

RSET

Hours of operation since counter reset (to reset counter, display counter

and press [Up] for 5 secs.)

TOTL

Total hours of operation since manufacture

MTMP

CURR

Display current main PCB temperature

MSR

Display highest main PCB temperature since last reset

Display highest main PCB temperature since manufacture

DTMP

CURR

Display current average driver PCB temperature

MSR

Display highest driver PCB temperature since last reset

Display highest driver PCB temperature since manufacture

PTMP

CURR

Display current average pixel PCB temperature

MSR

Display highest pixel PCB temperature since last reset

Display highest pixel PCB temperature since manufacture

AIRF

TOTL

Current elapsed time in hours since the air filter was cleaned or

changed. Display the counter and press the up button for five seconds

to reset it.This counter must be reset manually when the air filter is

cleaned.

STTM

Set duration of time alert to be issued after 100-9999 hours have

passed on the

TOTL counter, to remind you to clean it, particularly the

air filter. The alert appears as long as the value of the

TOTL counter

is higher than the threshold set here.

SNUM

RDM

Display fixture’s RDM ID

SNUM

Display fixture’s serial number

MAN

RST

Reset fixture. Press [Enter] to confirm

ALL 0 – 255

All LEDs, intensity 0 - 100%

RED 0 – 255

Red LEDs, intensity 0 - 100%

GRN1 0 – 255

Green 1, intensity 0 - 100%

GRN2 0 – 255

Green 2, intensity 0 - 100%

BLUE 0 – 255

Blue, intensity 0 - 100%

ZOOM 0 – 255

Zoom full wide → zoom full narrow (Hypermode)

TILT 0 – 255

Full tilt → full opposite tilt

PAN 0 – 255

Pan full left → pan full right

TEST

TALL

Test LEDs, zoom and pan/tilt movement

T-FX

Test LEDs and zoom only

TP-T

Test pan/tilt movement only

TDIS

Light all segments in onboard display panel for 5 secs.

DMXL

RATE

DMX transmission speed, live, in packets per second

QUAL

Percent of packets received with errors, live

STRT

Decimal value of the DMX start code, live

SERV

To access

this menu,

hold

[Enter]

pressed for

a few

seconds

PTFB

Enable pan/tilt position feedback/correction system

OFF

Disable pan/tilt feedback (this setting is not saved when fixture is reset)

ADJ

Effects adjustment menu (for service use: for full details of this menu,

see “Adjustment submenu” on page 35)

CAL

(OF = offset)

P OF

Pan calibration

T OF

Tilt calibration

DOF SURE

Load factory effects calibration settings

PCBT SURE

PCB test: for service use only

UPLD SURE

Manually set fixture to receive software upload

HEAD

DUAL

Sets head to dual head module operation

SNGL

Sets head to single head module operation

Menu Item Options Notes (Default settings in bold print)

Table 4: Control menu: single head module operation

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 39 40

Comments to this Manuals

No comments

Martin MAC 401 Dual User Manual Page 31

Comments to this Manuals

Related products and manuals for Floodlights Martin MAC 401 Dual