Martin Atomic Colors User Manual download pdf (Page 10)

System Connections

This section describes how to connect the Atomic Colors to your lighting system using a 2-unit or

an 8-unit external power supply.

Notes:

• Ensure the AC input power is switched off while you are connecting components of the

system.

• Do not connect the power supplies to any type of dimmer circuit.

• Before operating the Atomic strobe, make sure the power supply for the Atomic Colors is

connected, and switched on.

• When rigging the fixture and power supplies, use the safety wires as a means of secondary

attachment.

• When suspending the fixture above ground level, verify that the structure can hold at least 10

times the weight of all installed devices.

• Ensure that all cables are securely fixed and do not present a safety hazard of any sort.

MPU-02 / MPU-08 Power Supplies

The MPU-02 and MPU-08 power supplies are specifically designed for use with the Atomic

Colors. They are suitable for use with any 100-250 V, 50/60 Hz AC power supply, via an

IEC320/CEE 22 socket.

CONNECTING THE UNIT

The MPU-02 is a small, compact unit that powers two Atomic Colors. It has an XLR-5 connector

for DMX input and an XLR-4 connector for the combined power/data output to the color

scroller(s).

The MPU-08 is a rugged, touring style unit for theatrical bar/truss mounting. It can power up to

eight Atomic Colors fixtures in 2 circuits of four. It provides XLR-5 input/through output sockets

for DMX data, and 2 sets of XLR-4 input/return sockets for combined LV power/DMX data.

Atomic Colors User Manual Connecting the unit 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 24 25

No comments

Martin Atomic Colors User Manual Page 10