Martin Atomic Colors User Manual download pdf (Page 4)

SAFETY INFORMATION

Warning: This product is for professional use only!

It is not designed for household use.

This product is designed exclusively for use with the Martin Atomic 3000 DMX unit. Use the

device only as intended.

The Atomic 3000 DMX presents risks of lethal or severe injury due to fire and heat, electric

shock, ultraviolet radiation, and falls. Flashing light is also known to trigger epileptic seizures in

persons who are photosensitive. Please review the important safety information in the Atomic

3000 DMX user manual.

Read this manual before powering or installing the fixtures, follow the safety precautions listed

below and observe all warnings in this manual.

If you have questions about how to operate the fixtures safely, please contact your Martin dealer

or call the Martin 24-hour service hotline at +45 70 200 201.

Atomic Colors: Safety instructions.

Before using this unit please read this manual completely,

and

refer to the user manual for Atomic 3000 DMX strobe.

General

• Read this manual fully before starting to use the unit.

• Ensure that no objects or items are near the front aperture, or can get trapped in the roller

mechanism.

• Make sure the power supply for the Atomic Colors is connected and switched on, before

operating the Atomic strobe.

To guard against falls

• When fitting the unit to the Atomic 3000DMX, ensure all screws are thoroughly re-tightened.

• When rigging the unit, use the safety wire attached to the unit as a means of secondary

attachment.

Note: This safety wire is designed solely for use with the Atomic Colors unit. Use a

separate safety wire for Atomic 3000DMX strobe, and any other pieces of equipment.

• When suspending the fixture above ground level, verify that the structure can hold at least 10

times the weight of all installed devices.

• Verify that all external covers and rigging hardware are securely fastened and use an

approved means of secondary attachment such as a safety cable.

• Block access below the work area whenever installing or removing the fixture.

To guard against epileptic seizure

• Do not operate the fixture near stairways.

• Provide advance notice that strobe lighting is in use.

• Avoid extended periods of continuous flashing, particularly at frequencies of 10 to 20 flashes

per second, or with the color red.

Atomic Colors User Manual Safety Information 4

1 2 3 4 5 6 7 8 9 ... 24 25

No comments

Martin Atomic Colors User Manual Page 4