Martin LIGHTING DIRECTOR User Manual Page 65

  • Download
  • Add to my manuals
  • Print
  • Page
    / 105
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 64
CHAPTER 6 - Real-time mode
Real-time mode allows the Martin Lighting Director to track performers on stage and
to send and receive data according to the behaviours programmed in the map editor.
To enter real-time mode simply click on the “Real Time” option on the main MLD
screen. A new set of buttons and control areas will appear.
Figure 38 - Real Time Screen
tracker enable/disable box
diagnostic LEDs
tracker height
tracker coordinates in cm
this window shows
the area described
by the interactive
perimeter
The real time screen, like the map editor screen, is a bird’s eye view of the stage. The
software automatically zooms the window to show the area defined by the interactive
perimeter (defined automatically if the auto speaker calibration was used or manually in
the editor “Options” dialog box). When you press “Go” the system will begin emitting
ultrasound. When your tracker is on the stage, turned “on”, and with the “mute”
switch “off”, you will see a little dot on the map editor screen. As the tracker moves in
space so does the dot. You will also see one of the four columns on the top right
graphically showing the height of the tracker. A raw display of X, Y and Z coordinates is
presented in centimeters (or inches) and under it, a diagnostic display indicates the
quality of the tracking. When using several trackers you will see data for each.
At the top of each height display column there is a number from 1 to 4 which is a check
box to manually enable or disable tracking for a particular tracker.
The four small boxes directly underneath the coordinate display represent the four
ultrasonic speakers. If a box is red it means that the pulses from that speaker are not
being picked-up by the tracker. If the box is yellow the tracker is only receiving
shadows of pulses (echoes), which are not actually used for the calculations. If the box
is purple the software is discarding the pulse as a cymbal. Finally, if the box is green the
tracker is receiving pulses perfectly. These diagnostic displays can tell you several things:
MLD manual 1.1 Page 65
Page view 64
1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 104 105

Comments to this Manuals

No comments