Martin Mania EF2 User Manual download pdf (Page 13)

Basic service 13

ASIC

SERVICE

This chapter describes the maintenance procedures that you can perform

yourself.

Warning The exterior of the fixture can become hot. Always disconnect

the fixture from AC power and allow to cool for at least 20

minutes before handling or opening.

CLEANING

Regular cleaning of the elements in the optical path, as well as the air

vents, is vital to maintaining the operational quality of the Mania EF2.

Important! Excessive dust, smoke fluid, and particulate buildup degrades

performance and causes overheating and damage to the

fixture that is not covered by the warranty.

Cleaning the air vents

To maintain adequate cooling, dust must be cleaned from the air vents

periodically. Remove dust from the air vents with a soft brush, cotton

swab, vacuum, or compressed air.

Cleaning optical components

Clean the optical components regularly. The presence of smudges or dust

on optical surfaces can reduce the strength of the light output and the

quality of the effects.

Use care when cleaning optical components and work in a clean, well lit

area. The coated surfaces are fragile and easily scratched. Do not use

solvents that can damage plastic or painted surfaces.

1 Disconnect the fixture from power and allow it to cool for 20 minutes.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20 21

No comments

Martin Mania EF2 User Manual Page 13