Martin Mania EF2 User Manual download pdf (Page 9)

Installation 9

Always use a secure means of secondary attachment.

For indoors use only.

To hang the Mania EF2 on an overhead support:

1 Verify that the structure can support at least 10 times the weight of all

installed fixtures, clamps, cables, auxiliary equipment, and other items.

2 If hanging the fixture with a rigging clamp, verify that the clamp is

undamaged and is designed for the fixture’s weight. Bolt the clamp

securely to the mounting bracket on the fixture with a grade 8.8

(minimum) M12 bolt and lock nut, or as recommended by the clamp

manufacturer, through the clamp hole in the mounting bracket.

3 If permanently installing the fixture, verify that the hardware (not included)

and mounting surface can bear at least 10 times the fixture’s weight.

4 Working from a stable platform, clamp or fasten the fixture to the

structure.

5 Install a safety cable that can hold at least 10 times the weight of the

fixture through the safety cable attachment point on the fixture.

6 Loosen the swivel locks, tilt the fixture to the desired angle, and retighten.

7 Verify that the fixture is at least 1 meters (3.3 ft.) from the surface to be

illuminated and at least 0.3 meters (1 ft.) from any combustible materials.

Verify that the clearance around the air vents is at least 0.1 meters (4 in.).

Swivel locks

Safety cable

attachment point

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 20 21

No comments

Martin Mania EF2 User Manual Page 9