Martin Mania EF2 User Manual download pdf (Page 14)

14 Mania EF2 user manual

2 Remove the thumb screw holding the cover in place.

3 Slide the fixture cover open as far as possible (there is a physical stop

point that prevents access to the power supply section).

4 Vacuum or gently blow away dust and loose particles with compressed air.

5 Remove stuck particles with an unscented tissue or cotton swab

moistened with glass cleaner or distilled water. Do not rub the surface: lift

the particles off with a soft repeated press.

6 Remove smoke, and other, residues with cotton swabs or unscented

tissues moistened with isopropyl alcohol. A commercial glass cleaner may

be used, but residues must be removed with distilled water. Clean with a

slow circular motion from center to edge. Dry with a clean, soft and lint-

free cloth or compressed air.

7 Close the fixture cover and tighten the thumb screw, taking care not to trap

any loose wires.

LAMP MAINTENANCE

Warning Isolate electrically before re-lamping. The lamp shall be

changed if it becomes damaged or thermally deformed.

Thumb screw

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20 21

No comments

Martin Mania EF2 User Manual Page 14