Martin DMX Controller 2518 Specifications download pdf (Page 110)

103 LightJockey Help file - (C) Martin Professional 2010

LightJockey Help

Use these controls to change the scene and fade time for the current scene. Use the up/down buttons

to change the times, or type the time directly (click the field to activate, then type the new value). It is

possible to assign an individual scene and fade time to each scene. For new sequences, the default

scene and fade times defaults to 1.00 seconds and 0.05 seconds respectively.

Use the following options when setting scene and sequence times:

Synchronize scene and fade time - this will synchronize the scene and fade time so they are

identical.

Global Scene Time - this will cause all scenes to use the same scene time.

Global Fade Time - this will cause all scenes to use the same fade time.

Fade mode

This menu option will toggle between 'enable fade' and 'disable fade'.

When fade is enabled ,using playback or previous/next buttons, the sequence will execute using the

programmed fade time. When fade is disabled, all effects will snap to the new position, regardless of

fade time and fade state. This option often makes it faster to browse through a sequence with long

fade times since it is not necessary to wait for the fade to complete before evaluating the scene

contents. Note that the fade disable is only effective the sequence control while editing. As soon as

the sequence becomes part of a cue, it will use the programmed fade time and effect fades.

Click to switch the sequence control into blind mode - see sequence blind mode for details.

Add To current cue

This button will add the sequence to the current cue, provided there is enough free slots left in the cue

control. As the cue relates to sequence numbers, this button will only be enabled if the sequence has

been previously saved (saving the sequence assigns a number to new sequences).

Snapshot

Select Snapshot from the menu to record current DMX output values to the current scene or sequence

- see Snapshot and recording from DMX output for details.

See also basic programming terms and elements

Save sequence dialog

The save sequence dialog is accessed by clicking located on the sequence/cue tool bar and on

the sequence control.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 298 299

No comments

Martin DMX Controller 2518 Specifications Page 110