RUSH MH 4 Beam User Manual 13
Linking fixtures to power in a chain
If you obtain a 12 AWG or 2.5 mm
2
power input cable and 12 AWG or
2.5 mm
2
throughput cables from Martin™ (see ‘Accessories’ on page 44), you
can relay mains power from one fixture to another by connecting fixtures to
power in a linked daisy-chain, MAINS OUT throughput socket to MAINS IN
input socket.
Using 12 AWG or 2.5mm
2
cables from Martin™, you can link:
• Maximum five (5) RUSH MH 4 fixtures to power in a chain at 100-120 V, or
• Maximum ten (10) RUSH MH 4 fixtures to power in a chain at 200-240 V.
Fixture overview
1 - LEDs
The fixture has four LEDs on the front of the base: two are reserved for future
use; the other two are marked as follows:
Power
Power on
DMX Valid DMX signal present
2 – Display
3 – Buttons
MENU
• Activate the menu mode functions, or
• Return to the previous level of the menu
structure, or
• Press and hold to exit the menus
DOWN Go down a menu branch
UP Go up a menu branch
ENTER Confirm the selected menu item
4 - DMX XLR input/output sockets:
Comments to this Manuals