Martin DMX 5.3 Splitter User Manual download pdf (Page 17)

RUSH MH 4 Beam User Manual 17

Pan/tilt feedback

If you enable pant and tilt feedback in the FIXTURE SETTINGS P/T

FEEDBACK menu, the fixture will correct its pan and tilt positions if it detects

a position error.

Blackout during effect changes or movement

You can set the fixture to deploy the shutter to black out light output during

pan and tilt movement, gobo changes and/or color changes. Blackouts are

disabled by default.

Lamp settings

Lamp on/off

To manually power the lamp on or off:

1. Select LAMP SETTINGS and press ENTER to confirm.

2. Use the DOWN and UP buttons to scroll to ON/OFF and press ENTER to

confirm.

3. Use the DOWN and UP buttons to select ON or OFF.

4. Press ENTER to confirm and power the lamp on or off (or to return to the

previous level of the menu structure without making a change, press

MENU).

State/power on

To set the lamp to power on automatically when the fixture is powered on:

1. Select LAMP SETTINGS and press ENTER to confirm.

2. Use the DOWN and UP buttons to select STATE/POWER ON and press

ENTER to confirm.

3. Use the DOWN and UP buttons to select ON or OFF.

4. Press ENTER to confirm (or to return to the previous menu level without

making a change, press MENU).

DMX lamp control

The lamp can be controlled remotely by DMX. The following options are

available:

• OFF VIA DMX allows the lamp to be powered off by sending a DMX

command.

• ON IF DMX ON sets the lamp to power on automatically as soon as a

DMX signal is present.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 47 48

No comments

Martin DMX 5.3 Splitter User Manual Page 17