Martin DMX 5.3 Splitter User Manual download pdf (Page 20)

20 RUSH MH 4 Beam User Manual

2. Use the DOWN and UP buttons to select YES or NO and press ENTER to

confirm.

3. Press MENU to return to the previous menu level or let the unit idle one

minute to exit menu mode.

Fixture tests

The fixture can carry out an automatic test of all functions, or individual

functions can be tested manually.

Auto test

To perform a complete test of all of the effects:

1. Select FIXTURE TEST and press ENTER to confirm.

2. Use the DOWN and UP buttons to select AUTO TEST and press ENTER

to confirm. The fixture will run an automatic test sequence of all the

effects.

Manual test (manual control of individual effects)

To test individual effects:

1. Select FIXTURE TEST and press ENTER to confirm.

2. Use the DOWN and UP buttons to select MANUAL TEST and press

ENTER to confirm.

3. Select the function you want to test and press ENTER to confirm. You can

now test that function.

4. To return to the previous menu level, press MENU.

Fixture information

Fixture operating hours counter (non-resettable)

To see how many hours the fixture has been used since manufacture:

1. Select FIXTURE INFORMATION and press ENTER to confirm.

2. Use the DOWN and UP buttons to select FIXTURE USE TIME and press

ENTER to confirm. The number of hours will be shown.

Lamp operating hours counter (resettable)

This counter can be reset. It can be used to monitor the number of lamp

operating hours and help you decide when a lamp change is required.

1. Select FIXTURE INFORMATION and press ENTER to confirm.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 47 48

No comments

Martin DMX 5.3 Splitter User Manual Page 20