Martin MAC 350 Entour User Manual Page 26

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 25
26 MAC 350 Entour user manual
Gobos
The gobos fitted to the MAC 350 Entour as standard are illustrated in Figure 6 on page 19. All gobos are
interchangeable.
Custom gobos
Martin can provide additional gobos for the MAC 350 Entour. For more information, please visit the Martin
web site at www.martin.com.
Glass gobos are generally the most durable, but satisfactory results can be obtained at less expense with
aluminum gobos. Custom stainless steel gobos can also be used, but they can warp, losing sharpness, in a
matter of hours. Their useful life will depend on the gobo pattern and the projection cycle. Consult your gobo
supplier for more information.
For best results, custom gobos should meet the specifications listed under “Gobos” on page 44.
Gobo orientation in the MAC 350 Entour
Most gobos must be installed facing in a certain direction in order to avoid heat damage. All MAC 350
Entour gobos MUST be installed with the more reflective side towards the LEDs, or they will absorb too
much heat and be damaged. Consult your Martin dealer or gobo supplier if you are in any doubt about the
orientation of a specific gobo type.
Coated Glass Gobos
Focus is easiest to maintain if all coated gobos in a fixture are installed with their coatings
as close as possible to the same plane of focus. However, if there is a risk of heat damage
on a gobo, the first priority is normally to ensure that the more reflective side faces towards
the LEDs.
More reflective side towards LEDs
To minimize the risk of gobo overheating
and damage, turn the more reflective side of
a coated gobo towards the LEDs.
Less reflective side away from LEDs
The less reflective side of a coated gobo will
absorb less heat if it faces away from the
LEDs.
To determine which side of a gobo is coated,
hold an object up to it. On the uncoated side,
there is a space between the object and its
reflection and the edge of the gobo can be
seen when looking through the glass.
Textured Glass Gobos
Smooth side towards LEDs Textured side away from LEDs
Textured glass gobos in the MAC 350 Entour give the best focus results with the smooth
side towards the LEDs. If in doubt, consult your Martin dealer or gobo supplier.
Uncoated side Coated side
Page view 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 47 48

Comments to this Manuals

No comments