Martin MAC 350 Entour User Manual download pdf (Page 37)

Control menu 37

Control menu

Menu Item Options Notes (Default settings in bold print)

ADDR

1 – 501

DMX address (default address = 1). Limited to 496 in 16-bit DMX

mode.

PSET

8BT

8-bit DMX mode

16BT

16-bit DMX mode with 2-channel (coarse and fine) control of

gobo rotation, pan and tilt

PERS

PTST

PTSP

NORM, FAST and SLOW pan/tilt speed

SWAP

OFF = Normal pan and tilt control

ON = Map DMX pan control to tilt channel and vice versa

PINV

OFF = Normal pan control: left Æ right

ON = Reverse DMX pan control: right Æ left

TINV

OFF = Normal tilt control: up Æ down

ON = Reverse DMX tilt control, down Æ up

EFSP

NORM

Normal effects speed

FAST

Optimize effects movement for speed (gives slightly reduced

smoothness)

SLOW

Optimize effects movement for smoothness (gives slightly reduced

pan/tilt speed)

PTSS

Pan/tilt speed slave: effects speed copies the pan/tilt speed that has

been set via the control menu or via DMX

FANS

REG

Temperature-regulated fan operation

FULL

All fans set to full speed

SLNT

Silent mode. When Silent mode is selected the head fan will turn

off. The base fan will still run. Values allowed for RGB or HSV (no

matter what operating mode) will be limited to prevent the fixture

from producing too much heat. If the LEDs get too hot the fans will

revert to Regulated mode. When the LEDs are cool enough the

fans shift back to Silent mode. The color wheel channel will have

lower intensity in Silent mode.

DIM

LIN

Linear dimming curve

SQR

Square law dimming curve

ISQR

Inverse square law dimming curve

SCUR

S-curve dimming curve

DRES

OFF

Disable reset via DMX

Enable reset via DMX

SCUT

OFF

Effect wheels do not cross open

Effect wheels move shortest distance (even if this means

crossing open position)

DISP

Display on permanently

2 M

Display auto-sleeps and menu returns to top level after 2 mins.

10M

Display auto-sleeps and menu returns to top level after 10 mins.

2 ME

Display auto-sleeps and menu returns to top level after 2 mins.,

display is reactivated by error messages

10ME

Display auto-sleeps and menu returns to top level after 10 mins.,

display is reactivated by error messages

DINT

Display intensity 100% - 10% (default = 50%)

ERRM

NORM

Display errors at 100% intensity (regardless of DINT setting)

and illuminate the service light.

SLNT

Silent error mode. The error message does not appear in the

display, but the service light is illuminated

LCAL

CAL

Output set to maximum default value respecting calibration limits

MAX

Calibration ignored and output set to maximum

Note: fixture output may not match evenly between fixtures at this

setting.

Table 4: Control menu

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 47 48

Comments to this Manuals

No comments

Martin MAC 350 Entour User Manual Page 37

Comments to this Manuals

Related products and manuals for Floodlights Martin MAC 350 Entour