Martin MAC 401 Dual User Manual download pdf (Page 34)

INFO

PTMP

CURR

Display current average pixel PCB temperature

MSR

Display highest pixel PCB temperature since last reset

Display highest pixel PCB temperature since manufacture

AIRF

TOTL

Current elapsed time in hours since the air filter was cleaned or

changed. Display the counter and press the up button for five seconds

to reset it.This counter must be reset manually when the air filter is

cleaned.

STTM

Set duration of time alert to be issued after 100-9999 hours have

passed on the

TOTL counter, to remind you to clean it, particularly the

air filter. The alert appears as long as the value of the

TOTL counter

is higher than the threshold set here.

SNUM

RDM

Display fixture’s RDM ID

SNUM

Display fixture’s serial number

MAN

RST

Reset fixture. Press [Enter] to confirm

ALL 0 – 255

All LEDs, intensity 0 - 100%

RED 0 – 255

Red LEDs, intensity 0 - 100%

GRN1 0 – 255

Green 1, intensity 0 - 100%

GRN2 0 – 255

Green 2, intensity 0 - 100%

BLUE 0 – 255

Blue, intensity 0 - 100%

ZOOM 0 – 255

Zoom full wide → zoom full narrow (Hypermode)

TILT 0 – 255

Full tilt → full opposite tilt

PAN 0 – 255

Pan full left → pan full right

TEST

TALL

Test LEDs, zoom and pan/tilt movement

T-FX

Test LEDs and zoom only

TP-T

Test pan/tilt movement only

TDIS

Light all segments in onboard display panel for 5 secs.

PERS

PTST

PTSP

Pan and tilt speed normal / fast / slow

SWAP

Swap pan and tilt (pan commands move tilt and vice versa) - off / on

PINV

Pan inversion (reverse direction pan control) - off / on

TINV

Tilt inversion (reverse direction tilt control) - off / on

FANS

REG

Cooling fan speed thermostatically regulated

FULL

Max. cooling fan speed

SLNT

Silent mode. When Silent mode is selected the head fan will turn off.

The base fan will still run. Values allowed for RGB or HSV (no matter

what operating mode) will be limited to prevent the fixture from

producing too much heat. If the LEDs get too hot the fans will revert to

Regulated mode. When the LEDs are cool enough the fans shift back to

Silent mode. The color wheel channel will have lower intensity in Silent

mode.

DIM

LIN

Linear dimming curve

SQR

Square law dimming curve

ISQR

Inverse square law dimming curve

SCUR

S-curve dimming curve

DRES

OFF

Disable reset via DMX

Enable reset via DMX

DISP

Display is always on

2MN

Display switches off and goes into Sleep mode if the controls have

not been pressed for 2 minutes.

5MN

Display switches off and goes into Sleep mode if the controls have not

been pressed for 5 minutes

10MN

Display switches off and goes into Sleep mode if the controls have not

been pressed for 10 minutes

DINT 0-100

Display intensity. Default=100

ERRM

NORM

Display errors at 100% intensity (regardless of  setting) and

illuminate the service light.

SLNT

Silent error mode. The error message does not appear in the display,

but the service lamp is illuminated

CTC

WITH

Sending a value on a CTC channel adjusts the temperature of

whatever color is currently being displayed on segment or fixture

INDP

Sending a value on a CTC channel overrides any color being displayed.

Fixture or segment switches to white with variable color temperature

Menu Item Options Notes (Default settings in bold print)

Table 6: Control menu: dual head module operation, REAR menu

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments

Martin MAC 401 Dual User Manual Page 34

Comments to this Manuals

Related products and manuals for Floodlights Martin MAC 401 Dual