Martin EFX700 User Manual download pdf (Page 10)

10 Mania SCX600/700 user manual

Installing a cord cap on the power cable

The power cable must be fitted with a grounding-type cord cap (earthed

mains plug) that matches your AC power distribution system. Consult a

qualified electrician if you have any doubts about proper installation.

If you need to fit a cord cap, follow the cord cap manufacturer’s

instructions, connecting the yellow and green wire to ground (earth), the

brown wire to live, and the blue wire to neutral. The table below shows

some pin identification schemes:

Rigging the fixture

The Mania SCX600/700 must be mounted by means of its adjustable U-

bracket. Do not install the fixture by any other means, as this can cause

the fixture to overheat.

The U-bracket can be either fastened to a flat surface or attached to a

rigging clamp. Suitable rigging clamps are available from your Martin

dealer.

Warning! Block access below the work area and work from a stable

platform when installing or servicing the fixture.

Do not operate the fixture without fastening it securely to a

structure or surface.

Always use a secure means of secondary attachment that can

hold at least 10 times the weight of the fixture.

1. The fixture must be located at least 1 meter (3.3 ft.) away from the

surface to be illuminated and at least 0.1 meters (4 in.) from any

combustible materials (wood, fabric, paper, etc.). Ensure that the

clearance around the fan and air vents is at least 0.1 meters (4 in.).

Ensure that there are no inflammable materials nearby.

Wire Pin Marking Screw color

brown live “L” yellow or brass

blue neutral “N” silver

yellow/green ground green

Table 1: Cord cap wiring

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 51 52

No comments

Martin EFX700 User Manual Page 10