Martin EFX700 User Manual download pdf (Page 25)

Service and maintenance 25

2. Remove the lamp cover release thumbscrew and open the lamp cover

on its hinge.

3. Remove the old lamp

and socket from the

lampholder and,

being careful not to

strain any wires,

gently pull the lamp

off its ceramic socket.

4. Hold the new lamp by

its base (do not touch

any other part of the

lamp). Push the lamp

pins squarely into the

ceramic socket.

5. If you touched the

bulb, the reflector or

any optical components, clean them with a clean, lint-free cloth wetted

with isopropyl alcohol. Alcohol is extremely inflammable, so take

precautions to avoid fire risk.

6. Replace the lamp and socket in the lampholder. Close the cover,

checking that no wires are trapped, and replace the thumbscrew.

7. Reset the lamp hours counter (see “Information readouts” on page 21).

Lamp cover

release

thumbscrew

Focus knob

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 51 52

No comments

Martin EFX700 User Manual Page 25