Martin EFX700 User Manual download pdf (Page 16)

16 Mania SCX600/700 user manual

1. Apply power to the fixture and wait until the  message disappears

from the display. The fixture has now reset.

2. Press the [Menu] button once to enter the control menus.

3. Use the [Up] and [Down] buttons to scroll to

. Press [Enter] once

to enter the operating mode menu.

4. Use the [Up] and [Down] buttons to scroll between:

•

 (DMX mode)

•

 (Stand-alone auto trig mode) and

•

 (Stand-alone music trig mode)

5. Press [Enter]. The fixture enters the mode you have selected, and will

return to this mode when powered off and on.

Synchronized music trig and auto

trig operation

You can set multiple fixtures on a serial data link to respond together to a

music trig or auto trig signal from one fixture. This feature allows

synchronized operation without a DMX controller. The fixture sending the

signal is the ‘master’ fixture and the fixtures that receive the signal are the

‘slave’ fixtures.

Important! Set only 1 fixture on the link as master: damage can occur if 2

masters, or a master and a DMX controller, are linked.

Setting up synchronized operation

To set up Mania SCX600/700s for synchronized operation:

1. Ensure that all slave fixtures are in DMX mode.

2. Select one fixture to be the master and set it to stand-alone auto trig or

music trig mode (see “Selecting DMX, music trig or auto trig operating

modes” on page 15)

3. When slave fixtures receive signals from the master, they will

automatically begin operating in slave mode. The Data LED on their

control panels will light to show that they are receiving control data.

Fixtures return to their DMX/auto trig/music trig settings when powered off

and on, so you should only need to set fixtures as masters/slaves once.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 51 52

No comments

Martin EFX700 User Manual Page 16