Martin EFX700 User Manual download pdf (Page 33)

Service and maintenance 33

If one of the above error messages is displayed, try powering the fixture

off and then on again to reset it. If the problem persists, contact your

Martin dealer.

On the Mania SCX700, the message

 will be displayed if you douse

the lamp via DMX and then try to restrike it within eight minutes.

Software uploads

It is possible to upload new software to the Mania SCX600/700 via the

DMX IN connector using, for example, an uploader such as the Martin

MP-2 Uploader, or a PC using a Martin DABS interface device and a

suitable application such as the Martin Software Uploader. The latest

version of the Mania SCX600/700 software and the Martin Software

Uploader are available from the Support area of the Martin website at

http://www.martin.com

To prepare the Mania SCX600/700 to receive new software, select

→ in the control panel, then follow the instructions in the

uploader user manual or help files.

If the fixture will not accept a software upload as described above, it can

be forced to accept an upload by setting it to hard boot mode. To do this,

hold both the [Menu] and the [Enter] button pressed in while powering on

the fixture. The data LED will blink when the Mania SCX600/700 is in hard

boot mode.

If you have difficulty carrying out uploads, your Martin dealer will be able

to give advice or carry out the upload for you.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 51 52

No comments

Martin EFX700 User Manual Page 33