Martin EFX700 User Manual download pdf (Page 28)

28 Mania SCX600/700 user manual

3. Remove the two Philips head

screws on the fan housing and

lift out the fan for access (see

illustration).

4. Remove dust and dirt from the

fan blades and vent grill using a

soft brush or cotton swab and

vacuum.

5. Replace the fan, making sure no

wires are trapped.

6. Replace the lamp cover before

reapplying power.

Replacing the main fuse

The Mania SCX600/700 uses a time-delay fuse for protection against

current overload. An indication that the fuse may have blown is that when

power is applied and the lamp is switched on, no light is produced.

If the fuse blows repeatedly, there is a fault with the unit that requires

service by a Martin technician.

Never bypass the fuse or replace it with one of another type or rating.

1. Disconnect the fixture from power and allow to cool for at least 20

minutes.

2. Pry open the fuse holder (located next

to the power cable entry) with a flat-

head screwdriver and remove the

fuse.

3. Replace the fuse with one of the same

type. Fuse ratings are listed on serial

number labels and under “Electrical”

on page 46.

4. Replace the fuse holder.

5. If fuses continue to blow, there is

probably a fault. Disconnect the

fixture from power and data and

contact a Martin service technician.

Fuse holder

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 51 52

No comments

Martin EFX700 User Manual Page 28